Description
Your entire setup, now wireless.
Spark LINK XLR pairs beautifully when connecting a microphone to Spark LIVE and Spark EDGE—but it’s also built to make any setup wireless. Just connect any dynamic XLR microphone to the Spark LINK XLR transmitter and plug its receiver directly to the mic level input of a PA system, mixer, or audio interface. No complicated setup, no special gear needed. It’s wireless that just works.
Spark LINK XLR is compatible with:
- Dynamic microphones that do not require phantom power
- XLR devices with a mic level out
Hear every detail.
Spark LINK XLR delivers full-range, uncompressed sound with 24-bit/48kHz resolution and 103.7dB of dynamic range. Whether you’re singing or speaking your tone stays crystal clear from the source to the system.
Stay in sync.
Timing matters. That’s why Spark LINK XLR is built with ultra-low latency—as low as 3 milliseconds—so your voice stays perfectly in sync with your performance. No lag, no distractions.
Move freely.
With a transmission range of up to 21 meters (approx 70 feet), Spark LINK XLR gives you the freedom to roam. From crowded stages to street performances, it keeps you connected without dropouts.
Just plug in and go.
Spark LINK XLR auto-pairs in seconds—no channels to scan, no menus to scroll. LED indicators show you’re connected and ready to perform. You can even connect up to four Spark LINK XLR systems simultaneously without interference.
Made for Performers
Whether you’re:
-
- Singing live or public speaking
-
- Recording podcasts or livestreams
-
- Capturing acoustic instruments with a mic
-
- Using a DI box or mic-level gear
-
- Spark LINK XLR delivers pro-quality sound without the hassle of cables.
Key Features
-
- Auto-Pairing – Instant setup with no hassle
-
- Low Latency – Just 3ms delay for tight, live sound
-
- High-Quality Audio – 24-bit/48kHz audio, 20Hz–20kHz frequency response
-
- Long Battery Life – Up to 6 hours on a single charge
-
- LED Status Indicators – Know your connection and battery level at a glance
-
- Mute Function – Silent mode with a quick button press
-
- USB-C Charging – Fast and convenient
- Supports up to 4 Spark LINK XLRs simultaneously – can also be used with up to 4 Spark LINKs simultaneously since they operate on separate frequency bands.
