Description
With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit AD/DA, 32-bit internal processing, and 96 kHz sampling rate, plus support for additional control via external switches, an expression pedal, or MIDI.
The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analog/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There`s even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.
-Advanced hybrid design with analog and digital circuitry provides a huge range of drive tones from classic to modern
-Twelve primary drive modes plus 15 boost types with independent pre/post gain controls
-Selectable series or parallel boost structures for unlimited gain shaping
-Advanced gate section for eliminating noise and tightening high-gain tones
-Class-leading sound quality with 32-bit AD/DA, 32-bit floating point processing, and 96 kHz sampling rate
-Real-time panel setting and four memories for storing favorite sounds
-Panel Lock function disables controls to prevent unwanted changes
-Customizable multi-function footswitches for bypass, boost, memory selection, and more
-Support for expanded control via external footswitches, an expression pedal, or MIDI
-Full MIDI I/O provided with mini TRS jacks (BMIDI-5-35 adaptor cable available separately)
-Micro USB jack for firmware updates
-Runs on PSA-series AC adaptor or three AA-size batteries
Specifications
Sampling Frequency
96 kHz
AD/DA Conversion
32 bits
Processing
32-bit floating point
Drive Circuit
Analog + Digital
Modes
-12 modes
-OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ
Memory
4 + Manual
Nominal Input Level
INPUT: -10 dBu
Maximum Input Level
INPUT: +7 dBu
Input Impedance
INPUT: 1 M ohm
Nominal Output Level
OUTPUT: -10 dBu
Maximum Output Level
OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)
Output Impedance
OUTPUT: 1 k ohms
Recommended Load Impedance
OUTPUT: 10 k ohms or greater
Bypass
Buffered bypass
Controls
-ON/OFF switch, MEMORY/BOOST switch
-MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob
-PARAM button, MEMORY button
Display
-7 segments, 3 characters (LED)
Indicator
-PARAM indicator, MEMORY (MAN, 1–4) indicators
Connectors
-INPUT jack, OUTPUT jack: 1/4-inch phone type
-CTL 1, 2/EXP jack: 1/4-inch TRS phone type
-MIDI (IN, OUT) jacks: Stereo miniature phone type
-DC IN jack
-USB port: USB micro B-type (program update only)
Power Supply
Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw
220 mA
Expected Battery Life Under Continuous Use
Alkaline: Approx. 6 Hours
* These figures will vary depending on the actual conditions of use.
Accessories
-Owner`s Manual
-Leaflet “USING THE UNIT SAFELY”
-Alkaline battery (AA, LR6) x 3
-Rubber foot x 4
Options (sold separately)
-AC adaptor: PSA-S series
-Footswitch: FS-5U
-Dual footswitch: FS-6, FS-7
-Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
-TRS/MIDI cable: BMIDI-5-35
Size and Weight
Width
101 mm, 4 inches
Depth
138 mm, 5-7/16 inches
Height
63 mm, 2-1/2 inches
Height (including rubber foot)
65 mm, 2-9/16 inches
Weight
600 g, 1 lb 6 oz
