M-8x2 rack mount power conditioner

Although we don't have stock of this, you can still make a purchase now,
and we'll order it from our supplier immediately.


A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8x2 is designed for applications where lights are not required. Instrument RigsYou`ve got a rack for your effects, preamps, tuner...You`re going to plug that into the wall? One big spike and your rig is up in smoke. Furman`s standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman`s standard level RFI/EMI filtration, you`ll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.RecordingCan`t track down where that noise is coming from? Your mix sounding flat? With Furman`s standard level RFI/EMI filtration you`ll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman`s standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges.

With a 15A capacity and nine total outlets, it`s enough to power your whole home studio.DJ EquipmentBars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman`s standard level protection and filtration keeps the bad stuff out.Pro AudioWhen you`re out there gigging, you never know what kind of power you`re going to get. The wear and tear on mobile rigs eventually takes it toll - that`s why it`s smart to plug into Furman`s standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you`re setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.Maximum Output Current: 15 amps Line Cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug Operating Voltage: 120VAC 60Hz Spike Protection Mode: Line to neutral Energy Dissipation: 170 joules Peak Impulse Current: 12,000 amps Maximum Continuous Opterating Voltage: 130 VAC RMS Let Through Voltage (@ 125 amps, 8/20uS waveform) 400 volts Noise Attenuation: Transverse mode: Greater than 23dB, 200Khz to 10 Mhz Dimensions: 1.75 H x 19 W x 3.75 D Weight: 4.9 lbs. Safety Agency Listing: cTUVus Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship..