CAD
C195 condenser mic w/cable

AVAILABLE
$238.99

The CAD C195 is a superior low-noise, electret condenser cardioid microphone designed for professional vocalists and musicians. It provides the performance and features to satisfy today`s most demanding professionals.The C195 mic has a wide, flat-frequency response that provides unsurpassed natural transparent sound. The cardioid pickup pattern minimizes annoying feedback and reduces the pickup of unwanted off-axis sounds. A transformerless electronic design provides optimum low-frequency response and low distortion. An effective internal multistage pop filter minimizes wind and breath noise.The CAD C195 has a Flex-Form hardened steel grille screen that dramatically resists deformation while greatly reducing any risk of adverse performance caused by a bent or dented ball screen. This unique ability to retain its original shape assures that the CAD C195 will maintain its attractive appearance.The C195 features the CAD exclusive (I.N.R.-3) Impact Noise Rejection system. A proprietary rubber shock mount isolates the transducer from the barrel, thus dramatically reducing cable, stand, and handling noise.

The need for any external shock mounting device is virtually eliminated.The low-frequency response of the CAD C195 may be enhanced by increasing or decreasing the distance from the sound source. This phenomenon is technically known as proximity effect . Nominal or flat response is generated at a distance of 24 inches or more. However, as the distance to the sound source decreases, the bass sensitivity increases, providing a solid, robust character. Requires phantom power.Specifications:- Generating Element: Electret condenser (Phantom Powered) - Polar Pattern: Unidirectional (Cardioid) - Frequency Response: 50Hz-18kHzOutput Level: - Open Circuit Voltage: -55 dB (0 dB = 1 volt per microbar) - Impedance: 500 ohms - Dynamic Range: 110 dB - Equivalent Noise Level: Less than 22 dB, A weighted - Maximum SPL: 132 dB (1% THD, open circuit)Powering: - Supply Voltage: 9 - 52 Vdc, positive pins 2 & 3 reverse polarity protected - Current Required: Less than 5 mA over operating voltage range - Phasing: Positive pressure on diaphragm generates a positive voltage on pin 2 relative to pin 3 - Grille Screen: Hardened Steel Mesh - Case: Steel and die-cast zinc alloy - Finish: Durable soft feel, non-slip, titanium gray body, midnight black screen Features:- Wide, flat-frequency response - Natural, transparent sound - Cardioid pickup pattern minimizes annoying feedback and unwanted off-axis sounds - Transformerless electronic design - Internal multistage pop filter minimizes wind and breath noise - Hardened steel grille - Includes zippered pouch, swivel mount.